PET 950 Stereo
PURIFI 1ET7040SA BASED stereo AMPLIFIER
POWERFUL AND PRECISE
SPACIOUS, AIRY SOUND, ABUNDANT IN VIVID DETAIL WITH OUR CUSTOM INPUT BUFFER BOARD WITH WEISS OP2-BP
The Apollon Audio PET 950 Stereo Amplifier is exceptionally fast, uncommonly clean, and exceedingly musical with articulated, deep, tight, and powerful bass. This is how the amplifier can be described in one sentence and we have accomplished that with using a linear power supply to power the highly acclaimed Weiss OP2-BP Op Amp that is incorporated on our custom input buffer board.
Exceptional chassis design
The chassis is custom machined from solid aluminium. 10mm thick walls and 8mm thick lid and bottom. For improved aesthetics we have designed the chassis in such a way that there are no screws visible when you look at the amplifier as they are only on the bottom plate.
The aluminium feet provide isolation and absorption from the ground plane.
The chassis is executed in a very tasteful piano black color (available in pearl white). It is spray painted rather than anodised since paint is a softer, more absorbent material.
A very special feature is the backlit glass plate with the engraved Apollon mark and the large heatsink that absorbs the heat from the Purifi 1ET7040SA module and helps with keeping the amplifier module running on normal operating temperature even under high loads.
Layout and design
The PET 950 amplifier is hand-built with highest precision using only highest quality components. To connect your speakers we use top of the line WBT 0703 AG Pure Silver Binding Posts that are internally connected to the amplifier with Neotech UP-OCC 12AWG Solid Copper and 18AWG Pure Silver Speaker Output Wire and soldered with WBT silver solder. The input connectors are Neutrik high quality silver plated XLR sockets. The amplifier has a soft start function and it is turned on with a hidden push button switch on the bottom lid.Â
The stereo amplifier contains two Purifi 1ET7040SA modules coupled with our Apollon Audio PET custom input buffer boards with the acclaimed Weiss OP2-BP Op Amps onboard. The PET 950 stereo amplifier is powered with two  SMPS Hypex power supplies boasting 1200 Watts of power each. The standby control module is powered with a low-voltage power supply unit.
Providing low ripple and ultra low noise power to the Weiss OP2-BP Op Amps is possible with our custom designed linear power supply with large Nichicon capacitors and the LT3045/LT3094 Linear Voltage Regulators that play a key role for ultra low noise and fast transient responses on our custom input buffer boards for the Purifi 1ET7040SA based amplifier. They are responsible for improved low level listening ability, far superior 3D soundstage and high frequency details. The difference is mostly noticeable at higher volumes, where the clarity remains on higher levels and with ample details and dynamics even at low listening levels.
Power rating (per channel)
Watt @ 2 Ohm
Watt @ 4 Ohm
Watt @ 8 Ohm
Technical Specifications
True Dual Mono Design
Frequency Response: 0 – 50k Hz +0/-3dB
Low Distortion: THD+N – 0.00035 % @ 200W, 4Ω, 1kHz
High Input Impedance 100K
Signal to noise ratio: 129dB
28 dB Gain
Ultra High Damping Factor
High Current Output Max 40A Capable of driving 2ohm (for the Most Demanding of Speakers)
Power rating: 950W @ 2ohm | 500W @ 4ohm | 250W @ 8ohm
Case Dimensions: 350mm depth x 156mm height (with feet) x 450 mm width
Weight:Â 19 kg
Components
Hypex SMPS1200A700 (2 pcs.)
Purifi 1ET7040SA amplifier (2 pcs.)
Apollon Audio PET Input Buffer Board (2 pcs.)
Weiss OP2-BP Op Amp (4 pcs.)
Linear Power supply with LT3045/LT3094 (2 pcs.)
Apollon Control Board for standby control
Neutrik silver plated XLR line input socket (2 pcs.)
WBT 0703 AG binding posts (4 pcs.)
Neotech UP-OCC 12AWG Solid Copper and 18AWG Pure Silver Speaker output wire
12V Trigger for wakeup from standby
High quality fused mains input socket with power ON/OFF button
Aluminium enclosure with anti-vibration aluminium feet
Extended 2 years Full Warranty
The Apollon Audio PET 950 stereo amplifier comes with a 2 Years Full Warranty. We are using only highest quality components and materials to build our Apollon Audio PET 950 amplifier based on the Purifi 1ET7040SA modules. This selection by itself is a guarantee that the final product will stand the test of time and everyday use. Each PET 950 amplifier is hand-built with highest precision and care so we proudly stand behind our product and offer you a Full 2 Years Warranty.
APOLLON AUDIO PET 950
A Handbuilt amplifier. The Apollon Audio PET 950 stereo amplifier is carefully assembled by hand.
Based on Purifi 1ET7040SA. The 1ET7040SA amplifier modules are one of the best performing class D amplifiers.
Power rating. The monoblock gives you [email protected], [email protected] and [email protected] of power.
WBT 0703 AGÂ made of pure silver; accepts banana plugs, spades, crimped cable ends
2 Year Full Warranty The PET 950 amplifier has 2 years full warranty for any defects or malfunctions.
Starting from:
4.490,00€
